How to Deodex Kitkat Rom and lollipop also

KitKat deodexer 
Intro:-  Hi folks i am Ace Aggarwal i present to you my first software or project which is deodexer for all roms Its based on kamome tool  
Please feel free to message me i love to help all
Requirements

• Java
• Rooted phone
• Odexed rom
• USB Debugging enabled (If you want to pull files from your device)
• Custom Recovery (Tested on CWM)

Procedure

1. Extract downloaded tool
2. Run main.bat
3. Type 1 to create working folder
4. Plug in your phone, then type 2 to pull files from your device
   This step can be skipped if you manually copy /system/app, /system/framework, /system/priv-app to /Kitkat_Deodexer/system
5. Type 3 to start deodexing operation
6. Type 4 to create flashable zip
   This step also can be skipped if you want to build your own flashable zip by editing updater-script
7. Done

How to install it

1. Copy deodex_install.zip to your sdcard
2. Go to CWM recovery
3. Flash the zip
4. Done

WARNING:-ALWAYS DO A NANDROID BACKUP

                         Download link for my deodexer:-Click to Download

Dont steal my work make your own i will help you 

My Facebook Profile : https://www.facebook.com/developerace 

My goggle email address: aggarwalace@gmail.com                                                                                     

Tested Roms
Micromax Unite 2 all kitkat roms
CM 5.0 Roms


THIS TOOL BASED ON KAMOME TOOL CREDITS TO REAL DEV AND TO ME FOR JUST MODIFYING
HIS THREAD LINK-->http://forum.xda-developers.com/showthread.php?t=2713329

Read More

How To Convert system.img and boot.img to cwm flashable .zip

Hi friends
  Today I will teach you how to convert your SP tools flashable stock rom to cwm flashable zip
As you guys know if we flash stock rom via SP flash Tool there is a chance of hard-brick

Pre-Requisites:
*Custom Recovery Installed (CWM/TWRP)
*Xda android kitchen
*Stock ROM (system.img and boot.img files)

Please Ensure that your device must be Supported by kitchen

Follow the steps below and you will have a flash-able stock ROM for your device!

Procedure Please Pay attention :--
Step 1: Lets start things off by extracting the stock ROM
Step 2:Now open up your original_update folder in your android kitchen directory. And now copy the system.img and boot.img files from the stock ROM to the original_update folder.
Step 3: Open cygwin and do ./menu to access the Android Kitchen terminal.
Step 4:Click option 1 and delete or move any pre-existing WORKING folders (If there aren't any then move on to the next step)
Step 5:Select the option number that says "system.img and boot.img". Both files will be included into 1 number choice (the kitchen does that by default)
Step 6:Let the android kitchen do some file extracting and then a pop up window will come up. The instructions will be in the Cygwin window on how to do this step. **YOU WILL GET AN ERROR MESSAGE...JUST IGNORE IT***
Step 7:After you did what Cygwin told you to then go ahead and click enter and let the kitchen finish extracting.
Step 8:Now you should be back at the kitchen home screen. Go ahead and click option 2. This will give your ROM root access. I suggest adding the SuperSU but not all devices support it so do some research before choosing.
Step 9:Now go ahead and click option 3. This will add busybox so Superuser can work correctly.
Step 10:Now click option 0, and then option 11. This is recommended but not required. This deodexes the entire ROM. This will free up space on the ROM.
Step 11:Assuming you are still in the advanced options click option 14. This is also recommended by me but not required.
Step 12:Go back to the home screen in the kitchen by selecting option 0. Go ahead and click option 5. This is strongly recommended. This will free up a bunch of RAM so your phone will be less laggy. But yet again this is not required.
Step 13:Now you are ready to build your new ROM! Go ahead and do 99 and then press enter.
Step 14: Now select option 1 (Interactive is recommended for first build!)
Step 15:Choose yes to zipalign if you forgot to do it earlier. If you did zipalign earlier then just go ahead and skip.
Step 16:Now if a message pops up about changing to update-script or updater-script then just type "Y" and then click enter
Step 17:Your ROM will now start to build. After building of update.zip is finished it will ask if you want to sign your ROM. This is very recommended as CWM ask for signatures in the zip files by default for all users. So just go ahead and sign it (It only takes around 3-5 minutes)
Step 18:Now just name the ROM to your desire and you are done! You can now boot into your recovery mode and flash this ROM!

_________________________________________________________________________________
***CAUTION***
Before you proceed make sure that your device is supported by the android kitchen. If it is not supported you may get a bootloop after flashing the new ROM or a brick. So please make sure your device is supported!!                   

                                                                                                                                                                   

Please Comment your Queries

Contact Me:--

aggarwalace@gmail.com

My Facebook Profile:-

https://www.facebook.com/developerace

Read More

How to root Doodle 3 on Kitkat

 ROOTING DOODLE 3 ON KITKAT FIRMWARE 

PREREQUITIES:-

1.DATA CABLE
2.SP FLASH TOOLS    
3.MTK DROID TOOLS
4.DOODLE 3

METHOD PLEASE PAY ATTENTION 

1.DOWNLOAD ALL FILES FROM DOWNLOAD SECTIONS
2.INSTALL DRIVERS PERFECTLY
3.EXTRACT SP FLASH TOOL
4.LOAD SCATTER FILE IF U WANT TWRP THEN LOAD FROM TWRP FOLDER AND CWM THEN FROM CWM  FOLDER
5.CLICK ON DOWNLOAD
6.CONGRATS! YOU HAVE FLASHED CWM OR TWRP TO YOUR DOODLE 3
7.NOW BOOT TO RECOVERY BY PRESSING VOLUME UP + POWER THEN ONCE AGAIN BY VOLUME UP
8.FLASH SUPERSU.ZIP FILE

DOWNLOAD SECTION

SP FLASH TOOLS:-Download here

RECOVERY PACKAGE :-download now

SUPERSU ZIP FILE:-download now

Read More

WHAT TO DO TO FIX A HARD-BRICK {MTK} 100% WORKING METHOD

HI,
YOU GUYS HAVE BEEN ENCOUNTERED ERROR 4032 IN SP FLASH TOOLS WHILE FLASHING STOCK ROM.MAXIMUM PEOPLE HANDLE THOSE SMARTPHONE TO SERVICE CENTRE...
BUT NOW GET READY TO REPAIR IT AT HOME NOW ITS YOUR TURN TO BE  A DEVELOPER
SO LETS START....

  THINGS YOU NEED :--

• MTK MOBILE UNCLE TOOLS
• SMART PHONE FLASHING TOOLS
• MIND
• A ROOTED SMART PHONE 

METHOD
1.FIRST MAKE A BACKUP USING MTK DROID TOOLS PROCEDURE HERE
When The Phone Is On, Connect It To Pc. See If Any Notification Of 'Usb Debugging' Comes In Phone, If Not, Go To Settings->About Phone->And Tap Build Number 7 Times To Enable Debugging Options.--> Go Back And Enter Developers Options(In Settings), And Check Usb Debugging On.

1. Now Run Mtk Driod Tools And It Will Detect Phone. 
2. In Mtk Droid Tools, Click 'Root, Backup And Recovery' Tab.
3. Click 'To Process File ROM_ From Flash Tool.
4. Locate The File You Got From Read Back.
5. Say No To Make CWM Recovery Automatically And Cancel To Choose A Recovery For Similar Phone.
6. Now Wait Again.-->Once Done, You Will Get Your Sp Flashable Backup In MTK Driod Tools/Backup.
7. Read Back Complete.

2.Now How To Repair Your Hard Brick Mediatek

1.load your stock rom's scatter file 

2. Now navigate to location tab in sp tools

3.double click it now  a popup will appear now navigate to your mtk droid tool backup place and select the preloader bin file

4.now use firmware upgrade instead of download.now it will do flashing 

5.and fixed congo 

note:-- u may need to install mt65xx driver again   

download section:-

MTK DROID TOOLS:-click here

SP tools download ->click here  (download latest one)

Read More

Hacking And Bypassing Android Password/Pattern/Face/PIN

HACKING PASSCODES AND GESTURE LOCKES

This Is For Educational Purposes Only.You Shall Not Use This On Other People Phones Without Permission Under Any Circumstances
I'm Not Responsible For Any Eventual Errors And Misbehaving Of Your Devices
Files And Tutorials Are Used And Partially Created According My Expirience And Also Collected From Internet & XDA Forums
All Regards Are Going To Their Authors

Requirements:

1.The Device Needs To Have Usb Debugging Enabled
2.In Case Usb Debugging Isn't Enabled And You Have Recovery,you Can Run The Same Instructions From Recovery
3.For Some Methods Root Is Not Required (Though It Will Be Better If Device Is Rooted)

So Let's begin :-

Method No :-1 

Solution For Everyone With Recovery (Cwm, Twrp, Xrec,Etc...) Installed:

INSTRUCTIONS:

1. Download this zip Pattern Password Disable (Download from attachments) on to your sdcard (using your PC, as you cant get into your phone, right )
2. Insert the sdcard into your phone
3. Reboot into recovery mode
4. Flash the zip
5. Reboot
6. Done!

Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.

Method No :-2

Solution For Everyone Without Recovery Installed - ADB :

What You Need:
=>A computer running a Linux distro or Windows+Cygwin
=>USB cable to connect your phone to the PC
=>Adb installed

INSTRUCTIONS:
1. Connect you (turned on) Phone to the Computer via USB.
2. Open a terminal window.
3. Type code:          

                   adb devices    

                   adb shell          

                   cd data/system 

                   su                

                   rm *.key       

 4. Done...Now You Just Have To Reboot. 

METHOD 3
Solution For Everyone Before Lock Accident :

SMS Bypass - Download Link - Install It On Your Device (Download from attachments)
This App Allows You To Remotely Bypass Your Phone's Screen Lock By Sending A SMS.
It Removes Your Gesture Pattern Or Password After Receiving A Preset Keyword Along With A Secret Code Via SMS.
SMS Bypass App Requires Root.

INSTRUCTIONS:
1.First, make sure you give permanent root access to the app.
2.Change the secret code to your preferred choice. The default password is : 1234
3.To reset your screen lock, send the following message from another phone:

Code:

secret_code reset

Example:

Code:

1234 reset

Note 1 : There is a space between your secret code and reset. Also the secret code is case sensitive.
Note 2 : There is an option available to change the preset keyword. Default is : reset - Your phone will restart and your lock screen will be reset.
Note 3 : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.





METHOD 4
Solution For Everyone Via Adb - SQL Command :

INSTRUCTIONS:
=>Type This Commands Separated In Your Terminal (CMD Prompt) :

Code:

adb shell
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name='lock_pattern_autolock';
update system set value=0 where name='lockscreen.lockedoutpermanently';
.quit

=>Now You Just Have To Reboot.

Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.





METHOD 5
Solution For Everyone Via Adb - File Removal :

INSTRUCTIONS:
=>Type This Command In Your Terminal (CMD Prompt) :

Code:

adb shell rm /data/system/gesture.key

Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.





METHOD 6
Solution For Everyone With USB Debugging Enabled :

INSTRUCTIONS:

Primary Step for all method:

1. Download & Extract to anywhere - Bypass Security Hack (Download from attachments)
2. Open SQLite Database Browser 2.0.exe in SQLite Database Browser.
3. Run pull settings.db.cmd inside By-pass security Hacks folder to pull out the setting file out of your phone.
4. Drag settings.db and drop to SQLite Database Browser 2.0.exe program.
5. Navigate to Browse data tab, At table there, click to list down the selection & selete secure

Instruction To Remove Pattern Lock:

1. Now, find lock_pattern_autolock, Delete Record
2. Close & save database
3. Run push settings.db.cmd and reboot your phone

Instruction To Remove PIN Lock:

1. Now, Find Or Create lockscreen.password_type, double-click & change it's value to 65536, Apply changes!
2. Now, find lock_pattern_autolock, Delete Record, If doesn't exist, Ignore
3. Close & save database
4. Run push settings.db.cmd and reboot your phone

Instruction To Remove Password Lock:

1. Now, find lockscreen.password_salt, Delete Record
2. Now, find lockscreen.password_type, Delete Record
3. Close & save database
4. Run push settings.db.cmd and reboot your phone

Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.






METHOD 7
Solution For Everyone With Recovery Installed :

INSTRUCTIONS:

1.Download and Copy Aroma File manager.zip  to your memory card.

2. Open your recovery (press volume Down + Power button or it can be different according to the phones. Generally the phones who have press able button on the middle they have to press all three buttons. Google for you pattern there are lots)

3. There’ll b an option in recovery called “mount”. Go in that option and then mount all the cache and everything it is there.

4. Then select “update” and select “apply update from SD/external” and select aroma file manger.zip file that you downloaded using above QR code above.

5. After Flashing or updating, the aroma file manger will open. Use volume keys for up/down and power button 2 select like you use to get into recovery.

6. In aroma File manager , Go to menu , which is located in bottom strip and then select Settings.

7. Go to bottom n select “mount all partition in startup ” then exit from aroma file manger.

8. Now after exit , re-update that aroma file again and it will open again.

9. Go to data >> and then System.
Then find ‘gesture.key’ (for pattern lock) and ’password.key’ (for password lock) then long touch on gesture.key or password.key and sum option will be prompted , choose delete and delete that file and restart.

Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.

                                                                  DOWNLOAD SECTION---->

AROMA-FILE MANAGER-->CLICK TO DOWNLOAD

BY PASS SECURITY HACKZ---->CLICK TO DOWNLOAD

SMS BYPASS TRICK---->CLICK TO DOWNLOAD

PATTERN DISABLER---->CLICK TO DOWNLOAD

Read More

Sony Xperia Z2 all Apps (Kitkat Only)

Sony Xperia Z2 all Apps (Kitkat Only)

Bugs

1.Only launcher {DON'T USE THAT}

FEATURES :-

1.All Sony Apps {included Walkman,album,movies,social life,social connect and many more.}

2.Widgets also added.

3.Sexy U.I. it will kill you.

4.For KitKat Devices Only

SCREENSHOTS

DOWNLOAD SECTION

XPERIA ALL APPS --->  CLICK TO DOWNLOAD

                                 

How To Install

1.Go to C.W.M 

2.Flash the above zip 

3.Wipe dalvik-cache 

4.Reboot

       

Read More